Turn a motor

To turn a TT motor you will need the Crickit controller and  you will need to have the Crickit extension loaded in the MakeCode editor.  

Connect the two TT motor wires to the motor 1 slot on the Crickit.  It does not matter which color wire goes in the slot at this stage.

If you have installed the Cricket extension in MakeCode, you should have a green CRICKIT block group available.  Clicking on that group reveals various blocks for Crickit capabilities including those related to motor control.

Move a Motor Forward

Drag the crickit run motor block into the Forever loop

  • Change the speed by adjusting the percentage
  • The motor will run forever
  • If the motor is running the wrong way you can use a negative percentage